Removal Procedure
- Remove the trim plate from the front floor console. Refer to
Front Floor Console Trim Plate Replacement
in Instrument
Panel, Gages and Console.
- Disconnect the electrical
connector from the wiring harness in the front floor console.
- Using a small flat-bladed tool, release the retainer clips from
the heated seat switch.
- Remove the heated seat switch from the console trim plate.
Installation Procedure
- Install the heated seat
switch to the front floor console trim plate, pressing into place until fully
seated.
- Connect the electrical connector to the console wiring harness.
- Install the trim plate to the front floor console.
Refer to
Front Floor Console Trim Plate Replacement
in Instrument Panel, Gages and Console.