Removal Procedure
- Position the sunroof glass
panel in the fully closed position.
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Disconnect the electrical connector from the following components:
- Disconnect the rear drain hoses from the sunroof module.
- Disconnect the front drain hoses from the sunroof module.
- Have an assistant support the sunroof module before removing the
bolts.
- Remove the sunroof module to roof bolts.
- Remove the sunroof module from the vehicle roof, with an assistant.
Installation Procedure
- Position the sunroof module
to the vehicle roof, with an assistant.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the sunroof
module to roof bolts.
Tighten
Tighten the sunroof module to roof bolts to 10 N·m (89 lb in).
- Connect the front drain hoses to the sunroof module.
- Connect the rear drain hoses to the sunroof module.
- Connect the electrical connector to the following components:
- Inspect for proper operation of the sunroof.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
