Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking
tape around the perimeter of the painted surfaces and inner trim.
- Remove the rear quarter upper trim. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
- Remove the rear quarter lower trim. Refer to
Rear Quarter Lower Trim Panel Replacement
in Interior Trim.
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against the window. Do this from
inside the vehicle in order to protect the outer paint surface.
- This will allow the urethane adhesive to be separated from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
- Remove the quarter modular
window from the pinchweld flange.
