GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 Grand Prix 🢒 Accessories 🢒 Keyless Entry 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Object Number: 1205341 Size: SH
  1. Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
  2. Disengage the outboard receiver retainers from the I/P trim pad.
  3. Lift the receiver from the I/P trim pad and disconnect the electrical connector.
  4. Remove the receiver.

Installation Procedure

    Object Number: 1222218 Size: SH
  1. Connect the electrical connector.
  2. Install the receiver by positioning the inboard retainer to the I/P trim pad slot. Press the outboard retainers into the I/P trim pad openings.
  3. Install the I/P upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
  4. If a new remote control door lock receiver is being installed, synchronize the transmitter. Refer to Transmitter Synchronization .
  5. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Transmitter Programming .