GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 1220934  Size: SH
  3. Remove the bolt (1), the nut, and the washer which secure the lateral rod to the body bracket.

  4. Object Number: 1220935  Size: SH
  5. Remove the nut (1) that secures the lateral rod to the rear axle.
  6. Remove the lateral rod from the vehicle.

  7. Object Number: 1220938  Size: SH
  8. Remove the axle side bushings and washers from the lateral rod.

Installation Procedure


    Object Number: 1220944  Size: SH
  1. Install the axle side bushings and washers to the lateral rod.
  2. Install the lateral rod to the rear axle.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the side nut (1) that secures the lateral rod to the rear axle.
  5. Tighten
    Tighten the nut to 35-55 N·m (25-41 lb ft).


    Object Number: 1220947  Size: SH
  6. Install the bolt (1), the washer, and the nut which secure the lateral rod to the body bracket.
  7. Tighten
    Tighten the bolt to 50-70 N·m (37-52 lb ft).

  8. Lower the vehicle.