WIRE WHEEL COVERS P/N FOR WHEEL COVER AND LOCK

THE CUSTOM LOCKING WIRE WHEEL COVER PACKAGE (OPTION N91) IS SHIPPED IN THE TRUNK COMPARTMENT. THIS PACKAGE CONTAINS THE LOCKING WIRE WHEEL COVERS, LOCK BRACKETS, LOCK BOLTS, MEDALLIONS, LOCK KEY WRENCH AND I.D./REGISTRATION CARD. THE STANDARD WHEEL LUG NUTS ARE INSTALLED ON THE WHEEL AND THE TWELVE (12) SPECIAL LUG NUTS ARE PLACED IN THE TRUNK COMPARTMENT IN A SEPARATE PLASTIC BAG. IN SOME CASES SPECIAL NUTS MAY BE INSTALLED AT THE ASSEMBLY PLANT. AT THE TIME OF DELIVERY OF A NEW VEHICLE BY THE CARRIER, THE CONTENTS OF THE PACKAGE CONTAINING OPTION N91 ARE TO BE INSPECTED FOR MISSING OR INCORRECT PARTS. IN ADDITION, THE TRUNK COMPARTMENT IS TO BE INSPECTED FOR THE PLASTIC BAG CONTAINING THE SPECIAL LUG NUTS. ANY DISCREPANCIES ARE TO BE NOTED ON THE DELIVERY RECEIPT AND A TRANSPORATION CLAIMS IS TO BE FILED FOR ANY MISSING OR INCORRECT PARTS. REPLACEMENT OF MISSING, INCORRECT OR LOST PARTS LOCK KEY WRENCHES AND/OR ID REGISTRATION CARDS, ARE AVAILABLE FROM NORRIS INDUSTRIES AND THOMPSON INDUSTRIES. A. LOCK KEY WRENCH MISSING UPON DELIVERY OF VEHICLE FROM FACTORY OR LOST AT DEALERSHIP AFTER DELIVERY. SEND I.D./REGISTRATION CARD ALING WITH A CHECK IN THE AMOUNT OF $7.50 FOR THE REPLACEMENT LOCK KEY WRENCH TO THE APPLICABLE COMPANY. B. I.D./REGISTRATION CARD MISSING PROVIDE THE APPLICABLE COMPANY WITH THE COLOR OF THE STRIPE ON THE LOCK KEY WRENCH. A NEW COLOR COORDINATED I.D./REGISTRATION CARD WILL BE FORWARDED TO THE DEALERSHIP. C. LOCK KEY WRENCH DOES NOT FIT LOCK BOLT. SEND LOCK KEY WRENCH AND I.D./REGISTRATION CARD TO THE APPLICABLE COMPANY WITH A LETTER INDICATING THE COLOR OF THE LOCK BOLT IN THE CENTER OF THE LOCKING WIRE WHEEL COVER. THE PROPER LOCK KEY WRENCH AND I.D./REGISTRATION CARD WILL BE RETURNED TO THE DEALERSHIP. D. I.D./REGISTRATION CARD AND LOCK KEY WRENCH BOTH MISSING. PROVIDE THE COLOR OF THE LOCK BOLT IN THE CENER OF THE WIR WHEEL COVER, ALONG WITH A CHECK IN THE AMOUNT OF $7.50 MADE PAYABLE TO THE APPLICABLE COMPANY. THE PROPER LOCK KEY WRENCH AND I.D./ REGISTRATION CARD WILL BE FORWARDED TO YOUR DEALERSHIP BY THE APPLICABLE COMPANY (NORRIS INDUSTRIES OR ITT THOMPSON INDUSTRIES). THOMPSON INDUSTRIES - LOCKING WIRE WHEEL COVERS REQUIRE A "T" SHAPED LOCK KEY WRENCH. THEIR WRENCH WILL HAVE A DAUB OF PAINT TO MATCH THE LOCKNUT COLOR. NORRIS INDUSTRIES - LOCKING WIRE WHEEL COVERS REQUIRE A "T" SHAPED LOCK KEY WRENCH. THEIR WRENCH WILL HAVE AN ALPHA LETTER STAMPED ON ITS CYLINDER PORTION TO MATCH THE LOCK BOLT LETTER. PARTS ORDERING ALL REQUESTS MUST BE MADE ON DEALERSHIP STATIONARY TO THE APPLICABLE COMPANY: NORRIS INDUSTRIES, INC. AUTOMOTIVE TRIM DIVISION ALL MODELS 39600 ORCHARD HILL PLACE NOVI, MICHIGAN 48050 OR THOMPSON INDUSTRIES 423 N. MILL STREET 1984 CUTLASS SUPREME MODELS ONLY ADEL, GA 31620 OR THOMPSON INDUSTRIES P.O. BOX 119 ALL MODELS EXCEPT CUTLASS SUPREME MADISON, FL 32340

OTHER MISSING OR INCORRECT PART(S) SUCH AS A LOCKING WIRE WHEEL COVER(S), LOCK BRACKET(S), MEDALLION(S) AND SPECIAL LUG NUT(S) ARE AVAILABLE THROUGH WDDGM. SEE FIGURE 1 FOR PARTS ILLUSTRATION. SEE BULLETIN FOR FIGURE 1 PARTS ILLUSTRATION IN ADDITION TO INDIVIDUAL COMPONENTS, A COMPLETE LOCKING WIRE WHEEL PACKAGE (OPTION N91) IS AVAILABLE BY NORRIS THROUGH WDDGM FOR THE 1984 MODELS. THIS PACKAGE CONTAINS THE FOLLOWING COMPONENTS: FOUR (4) LOCKING WIRE WHEEL COVERS, FOUR (4) MEDALLIONS, FOUR (4) LOCK BRACKETS, FOUR (4) LOCK BOLTS, FOUR (4) VALVE EXTENSIONS, (12) LUG NUTS, ONE (1) KEY WRENCH, ONE (1) REGISTRATION CARD AND INSTALLATION INSTRUCTIONS. LISTED BELOW ARE THE PART NUMBERS FOR THIS PACKAGE. (THOMPSON INDUSTRIES DOES NOT PACKAGE A COMPLETE A WIRE WHEEL PACKAGE FOR SERVICE.) WDDGM PART NUMBER MODEL 997097 TORONADO 998389 88 (15 X 7 WHEEL) 998390 98 AND WK9 (15 X 6 WHEEL) 997784 CUTLASS CIERA AND OMEGA 13" WHEEL 997785 CUTLASS CIERA 14" WHEEL 998388 CUTLASS SUPREME 14" WHEEL 997782 "J" FIRENZA 13 X 5" WHEEL 997783 "J" FIRENZA 15 X 5 1/2" WHEEL W/F41 WHEN THE VEHICLE IS BEING MADE READY FOR DELIVERY, THE LOCK BRACKETS ARE TO BE INSTALLED PRIOR TO INSTALLATION OF THE WIRE WHEEL COVER AND MEDALLIONS. 1. RAISE VEHICLE WITH LIFT EQUIPMENT. 2. REMOVE THREE (3) LUG NUTS FROM EACH WHEEL FOR LOCK BRACKET INSTALLATION - REFER TO ILLUSTRATION. FIGURE 1. 3. PLACE LOCK BRACKET ON LUG NUT STUDS. 4. INSTALL THREE (3) SPECIAL LUG NUTS ON EACH WHEEL TO RETAIN LOCK BRACKET AND TORQUE TO SPECIFICATIONS. LOOSE CONDITION OF LOCK BRACKET WILL BE NORMAL. WHEN LUG NUTS ARE SEATED, FRONT WHEEL STUDS WILL HAVE A RECESSED APPEARANCE, WHICH IS NORMAL. 5. INSTALL WHEEL COVER ON WHEEL. 6. TIGHTEN LOCK BOLT WITH LOCK KEY WRENCH. 7. SNAP IN CENTER MEDALLION. 8. INSTALL REMOVAL LABEL TO UNDERSIDE OF DECK LID NEXT TO JACKING INSTRUCTION LABEL. 9. THE LOCK KEY WRENCH IS TO BE PLACED IN THE GLOVE BOX ALONG WITH THE I.D./REGISTRATION CARD. THE PROCEDURE FOR REMOVAL AND INSTALLATION IS TO BE EXPLAINED TO THE OWNER PRIOR TO DELIVERY. 1984 LOCK BOLT OR NUT ITT THOMPSON NORRIS INDUSTRIES INDUSTRIES LOCK BOLT/NUT IDENTIFICATION

PATTERN IS KEYED TO LOCK BOLT/NUT COLOR. SPLINE PATTERN SCALLOP PATTERN

FIRENZA, OMEGA RED 22519907 RED 14035631 A CUTLASS CIERA, GOLD 22519908 GREEN 14035632 B CUTLASS SUPREME, BLUE 22519909 BROWN 14035633 C EIGHTY-EIGHT OLIVE 22519910 GOLD 14035634 H AND 98 REGENCY BLACK 22519911 BLACK 14035635 L BROUGHAM SEDAN SILVER 22519912 RED 22511943 A GREEN 22511944 B TORONADO BROWN 22511945 C GOLD 22511946 H BLACK 22511947 L FIGURE 3

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.