Preliminary Procedure

1. Remove the front seat. Refer to Driver and Passenger Seat Replacement .
2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
3. Remove the seat back frame. Refer to Front Seat Back Frame Replacement .
4. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

1

Bolt, Seat Cushion Frame (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Frame Assembly, Seat Cushion

Tip
Disconnect any electrical harness or connectors attached to the seat frame and reference for installation.