Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
| • | Unnecessary SIR system repairs |
| • | Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. |
| • | If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System. |
- Disable the inflatable restraint steering wheel module.
Refer to
Disabling the SIR System
in
SIR.
- Remove the lock cylinder. Refer to
Ignition Lock Cylinder Replacement - On Vehicle
.
- Remove the steering column tilt head housing. Refer to
Steering Column Tilt Head Housing - Disassemble - Off Vehicle
.
- Remove the 2 tapping screws (1).
- Remove the lock bolt support bracket (2).
- Remove the lock bolt assembly (3).
- Remove the ignition lock actuator assembly (4).
