Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open. | ||||
1 |
Is the resistance within the specified range? | 0-2 ohms | Go to Step 2 | Go to Step 3 |
2 | Use the DMM in order to measure the voltage between terminal A of the IP compartment lamp switch connector and ground. Does the voltage measure the specified value? | B+ | Go to Step 4 | Go to Step 5 |
3 | Repair the open in CKT 150 between the IP compartment lamp switch and ground G204. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
4 | Replace the IP compartment lamp switch. Is the repair complete? | -- | -- | |
5 | Repair the open in CKT 1732 between splice S222 and the IP compartment lamp switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | B+ | -- | |
