Removal Procedure
- Remove the rear shelf trim panel if equipped
with antenna amplifier. Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Remove the right carpet retainers. Refer to
Carpet Retainer Replacement
in Interior Trim.
- Remove the center pillar trim panel. Refer to
Center Pillar Upper Trim Panel Replacement
in Interior Trim.
- Pull back the carpet for access to the wiring harness as required.
- Disconnect the antenna coaxial cable from the antenna amplifier
if equipped.
- Disconnect the antenna coaxial cable from the rear of the radio.
Refer to
Radio Replacement
.
- Cut off the visible end of the coaxial antenna cable (1)
from the wiring harness in the instrument panel area.
- Cut off the visible end of the coaxial antenna cable from the
wiring harness in the rear shelf area.
Installation Procedure
- Install the coaxial antenna cables to
the wiring harness. Use electrical tape in order to secure the antenna extension
cable to the top of the wiring harness. Secure the cable to the harness at
least every 150 mm (6 in).
- Connect the coaxial antenna cable to the rear of the radio. Install
the radio. Refer to
Radio Replacement
.
- Reposition the carpet.
- Install the center pillar trim panel. Refer to
Center Pillar Upper Trim Panel Replacement
in Interior Trim.
- Install the right carpet retainers. Refer to
Carpet Retainer Replacement
in Interior Trim.
- Position the coaxial antenna cable from the body wiring harness
to the rear shelf area.
- Connect the antenna coaxial cable to the antenna amplifier if
equipped.
- Install the rear shelf trim panel if equipped with antenna amplifier.
Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.
- Install the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.