GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Torrent 🢒 Engine 🢒 Engine Controls and Fuel - 3.4L 🢒 Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure

    Object Number: 1371130 Size: SH
  1. Remove the nuts (1) securing the evaporative emission (EVAP) hose/pipe (2) to the strut tower.
  2. Disconnect the EVAP purge hose/pipe (2) from the purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service.

    3. Object Number: 879155 Size: SH
  3. Disconnect the engine EVAP purge hose/pipe from the chassis EVAP purge hose/pipe. Refer to Plastic Collar Quick Connect Fitting Service.
  4. Cap or plug both the engine and chassis EVAP purge hose/pipes to prevent contamination.

    5. Object Number: 1371130 Size: SH
  5. Remove the EVAP hose/pipe (2) from the retainer (3).
  6. Remove the EVAP hose/pipe (2) from the vehicle.

Installation Procedure

    Object Number: 1371130 Size: SH
  1. Install the EVAP hose/pipe (2) to the vehicle.
  2. Install the EVAP hose/pipe (2) to the retainer (3).

    3. Object Number: 879155 Size: SH
  3. Remove the caps or plugs from both the engine and chassis EVAP purge hose/pipes.
  4. Connect the engine EVAP purge hose/pipe to the chassis EVAP purge hose/pipe. Refer to Plastic Collar Quick Connect Fitting Service.

    5. Object Number: 1371130 Size: SH
  5. Connect the EVAP purge hose/pipe (2) to the purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service.

    6. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the nuts (1) securing the evaporative emission EVAP hose/pipe (2) to the strut tower.

    7. Tighten
    Tighten the nuts to 10 N·m (89 lb in).