SMU - Revised Fuel Tank Pressure (FTP) Sensor Range Readings

This bulletin is being issued to revise the values column in various documents in the Engine Controls sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Important: The Tech 2® will no longer display pressure readings for the fuel tank pressure (FTP) sensor. The 2005 Vibe will show voltage readings for the FTP sensor. This currently ONLY effects the 2005 Vibe - you do not need to contact TCSC or TAC regarding this issue.

The fuel tank pressure (FTP) sensor range is now shown as a voltage reading instead of a pressure reading. The following SI Documents have been effected: