For 1990-2009 cars only
Removal Procedure
- Unclip the heater wire harness from the headlamp tab (1).
- Unclip the heater wire harness below the on the outside of the battery (2).
- Unclip the heater wire harness from the main wire harness (1).
- Unclip the heater cartridge from the engine block.
Installation Procedure
- Fully seat the heater cartridge against the engine block and ensure the retaining clip snaps in place. The final orientation of the wire harness should be in the 3 o'clock position. Turn the retaining clip 90 degrees from the wire harness to the 12 o'clock position.
- Ensure the wire harness cartridge plug is fully seated onto the cartridge.
- Ensure the main wire harness clip (1) is fully seated.
- Route the heater wire harness as shown.
- Tuck the heater wire harness below the junction box on the outside of the battery.
- Tuck the 110V heater plug in the space in between the battery and headlamp assembly (1).
- Clip the heater wire harness on the outside of the battery (2).
- Ensure that the 110V plug tie-strap securely holds the wire bundle and the protector cap is fully seated on the plug.
