GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Pontiac
๐ข
2009
๐ข
Vibe - AWD
๐ข
Engine
๐ข
Engine Controls and Fuel - 2.4L (LAX)
๐ข Camshaft Position Sensor Replacement
Removal Procedure
Remove the engine cover. Refer to
Engine Cover Replacement
.
Remove the air cleaner cap with hose.
Disconnect the camshaft position sensor connector (1).
Remove the bolt (2) and the camshaft position sensor.
Installation Procedure
Apply a light coat of engine oil to the O-ring (1) of the sensor.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the camshaft position sensor with the bolt (2) and tighten to
9.0 Nยทm (80 lb in)
.
Connect the camshaft position sensor connector (1).
Install the air cleaner cap with hose.
Inspect for engine oil leak.
Install engine cover. Refer to
Engine Cover Replacement
.