| Table 1: | Body Control Module (BCM) Scan Tool Data Parameters |
| Table 2: | Body Control Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
|---|---|---|---|
Operating Conditions: Engine ON | |||
Automatic Door Locking | -- | No | The scan tool displays Yes or No. This is the current status of the automatic door locking feature. |
Automatic Door Unlocking | -- | No | The scan tool displays Yes or No. This is the current status of the automatic door unlocking feature. |
Cruise Control | -- | OK | The scan tool displays OK or Fault. This is the current status of the cruise control system. |
Driver Door Jamb Sw. | -- | Off | This displays On or Off. This is the current status of the driver door jamb switch. |
Hatch/Trunk Ajar | -- | Varies | The scan tool displays Active or Inactive. This is the current status of the hatch/trunk ajar signal. |
Ign. Accessory | -- | Inactive | The scan tool displays Active or Inactive. This is the status of the ignition accessory. |
Ignition Switch | -- | On | The scan tool displays On or Off. This is the current status of the ignition switch. |
IPC Serial Communications Fault | -- | Off | The scan tool displays On or Off. This is the current status of communication with the IPC. |
Park Assist System Status | -- | Not Equipped | This displays Equipped or Not Equipped. This is displayed if vehicle is park assist system equipped |
Parking Brake Switch | -- | Off | This displays On or Off. This is the current status of the parking brake. |
Passenger Door Ajar Sw. | -- | Off | This displays On or Off. This is the current status of the passenger door ajar switch. |
Remote Panic Command | -- | No | The scan tool displays Yes or No. This is the current status of the key fob panic command. |
Sunroof Enable Command | -- | Enable | This displays Enable or Disable. This is the current status to open the sunroof. |
Theft Deterrent Status | -- | OK to Start | This displays OK to Start or No Start. This is the current vehicle start status. |
Tire Pressure Monitor | -- | Not Present | This displays Present or Not Present. This is displayed if vehicle is TPM equipped. |
Scan Tool Output Control | Description |
|---|---|
Door Lock | This output control is used to command the door lock On and Off. |
Driver Door Unlock | This output control is used to command the driver door unlock On and Off. |
Headlamps | This output control is used to command the headlamp relay On and Off. |
Horn | This output control is used to command the vehicle horn On and Off. |
Interior Lamps | This output control is used to command the illuminated entry system On and Off. |
Security Lamp | This output control is used to command the daytime running lamps On and Off. |
Fog Lamps | This output control is used to command the fog lamps On and Off. |
High Beams | This output control is used to command the security indicator On and Off. |
Theft System Horn | This output control is used to command the security horn On and Off. |
Twilight Sentinel | This output control is used to command the twilight relay On and Off. |
