| Table 1: | Instrument Cluster Scan Tool Data Parameters |
| Table 2: | Instrument Cluster Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
|---|---|---|---|
Operating Conditions: Engine ON | |||
Ambient Light Sensor | -- | Varies | This displays percent. This is the current status of the ambient light sensor. |
Ambient Temperature | -- | Varies | The scan tool displays °C or °F. This is the current ambient temperature. |
Displayed Coolant Temperature | -- | Varies | The scan tool displays °C or °F. This is the current coolant temperature. |
Engine RPM | -- | Varies | The scan tool displays RPM. This is the current engine speed. |
Fuel Level Gauge | -- | Varies | The scan tool displays Liters. This is the fuel level based on a fuel level signal received from the fuel sender gauge. |
I/P Dimmer Output | -- | Varies | The scan tool displays Percent. This is the current status of the I/P dimmer output. |
Oil Life Remaining | -- | Varies | The scan tool displays Percent. This is the current status of the oil life remaining. |
Seatbelt Chime | -- | None | The scan tool displays Driver, Passenger, Both or None. This is the what is the current cause the seatbelt chime. |
Trip Odometer A/B Switch | -- | Off | The scan tool displays On or Off. This is the current status of the trip odometer A/B switch. |
TPM System Enabled | -- | No | The scan tool displays No or Yes. This is the status of the TPM system. |
Vehicle Speed | -- | Varies | This displays km/h / mph. This is the current vehicle speed. |
Scan Tool Output Control | Description |
|---|---|
Coolant Gauge Sweep | The IPC controls the Coolant Gauge. |
Charge Indicator | The IPC turn the charge indicator On and Off. |
Display Test | The IPC illuminates turns all of the IPC lights On and Off. |
Fuel Gauge Sweep | The IPC control the fuel gauge. |
Low Fuel Lamp | The IPC turns the low fuel lamp On and Off. |
Speedometer Sweep | The IPC controls the speedometer. |
Tachometer Sweep | The IPC controls the tachometer. |
