Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Horn Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the Horn system description and operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Horns |
2 | Verify the fault is present. Does the system operate normally? | Go to Step 3 | |
3 | Remove the horn relay. Did the horn stop sounding? | Go to Step 4 | Go to Step 5 |
4 |
Important: The horn switch circuit is part of the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement. To disable the SIR, system refer to SIR Disabling and Enabling. With the horn relay still removed, test the switch signal circuit for continuity to ground. Refer to Circuit Testing. Is ground present? | Go to Step 6 | Go to Step 7 |
5 | Repair the short to voltage in the horn supply voltage circuit. Refer to Wiring Repairs. Did you find and complete the repair? | Go to Step 8 | -- |
6 | Repair the short to ground in the horn relay switch signal circuit. Refer to Wiring Repairs . Did you find and complete the repair? | Go to Step 8 | -- |
7 | Replace the horn relay. Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
