Clutch Actuator Cylinder Replacement MVE Manual Transmission

1. Using a 10 mm union nut wrench, disconnect the clutch line.



2. Remove the bolts (1, 2) and disconnect the clutch tube bracket.



3. Remove the bolts (1, 2) and the clutch release cylinder.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the clutch release cylinder with the bolts (1, 2) and tighten to 12 N·m (106 lb in).



2. Connect the clutch tube bracket with the bolts (1, 2) and tighten.

•	Bolt 1 to 12 N·m (9 lb ft).

•	Bolt 2 to 8.0  N·m (71 lb in).




3. Using a 10 mm union nut wrench, connect the clutch line and tighten.

•	Without a union nut wrench 15 N·m (11 lb ft).

•	With a union nut wrench 14 N·m (10 lb ft).

4. Fill brake fluid reservoir.
5. Bleed clutch line. Refer to Hydraulic Clutch Bleeding.
6. Inspect fluid level.
7. Inspect for fluid leak.

Clutch Actuator Cylinder Replacement MVC Manual Transmission

1. Remove release cylinder heat insulator.
2. Remove clutch accumulator bracket.
3. Using a 10 mm union nut wrench, disconnect the clutch line.



4. Remove the bolt and nuts (1, 3), and disconnect the clutch accumulator assembly and clutch tube bracket.



5. Remove the nuts (1, 2) and clutch release cylinder assembly.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the clutch release cylinder with the nuts (1, 2) and tighten to 12 N·m (106 lb in).



2. Connect the accumulator assembly and clutch tube bracket with the bolt and nuts (1, 3) and tighten.

•	The nut to 12  N·m (106 lb in).

•	The bolt to 8 N·m (71 lb ft).




3. Using a 10 mm union nut wrench, connect the clutch line and tighten.

•	Without a union nut wrench 15 N·m (9 lb ft).

•	With a union nut wrench 14 N·m (10 lb in).

4. Install clutch accumulator bracket.
5. Install release cylinder heat insulator.
6. Fill brake fluid reservoir.
7. Bleed clutch line. Refer to Hydraulic Clutch Bleeding.
8. Inspect fluid level.
9. Inspect for fluid leak.