GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Transmission 🢒 Automatic Transmission - MVB 4 Speed 🢒 Control Valve Body Installation

    Object Number: 2011806 Size: SH
  1. Coat a new O-ring (1) with ATF WS and install it to the transmission wire.

    2. Object Number: 2011810 Size: SH
  2. Pass the transmission wire through the transaxle.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2011805 Size: SH
  3. Install the transmission wire (1) with the bolt and tighten to 5 N·m (44 lb in).
  4. Install the transmission valve body assembly. Refer to Control Valve Body Replacement.
  5. Install the battery tray. Refer to Battery Tray Replacement.
  6. Install the battery. Refer to Battery Replacement.
  7. Connect the cable to the negative battery terminal. Refer to Battery Negative Cable Disconnection and Connection.
  8. Add the automatic transaxle fluid.
  9. Inspect the automatic transaxle fluid.
  10. Inspect for automatic transaxle fluid leak.
  11. Install the left hand side engine splash shield. Refer to Engine Splash Shield Replacement - Left Side.