- Remove the No. 1 transfer case plug and gasket.
Note: When changing oil, recheck the oil level after driving.
- Check that the oil level is within 0-5 mm (0-0.197 in) (a) from the lowest position of the hole for No. 1 transfer case plug.
- When the oil level is too low, check for oil leakage.
• | When checking oil, make sure that the vehicle is level. |
• | When adding oil, pour it slowly. |
• | Add oil gradually at several intervals. |
• | After leaving it alone for 5 min, check the oil level again. |
Caution: Refer to Fastener Caution in the Preface section.
- Install the No. 1 transfer case plug with a new gasket.
Tighten
Tighten the plug to 49 N·m (36 lb ft).