Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK |
3 | Inspect the steering column and the intermediate shaft for looseness. Is the steering column or the intermediate shaft loose? | Go to Step 7 | Go to Step 4 |
4 | Inspect the SIR coil for noise. Is the SIR coil noisy? | Go to Step 8 | Go to Step 5 |
5 | Inspect the steering column and the steering shaft for damage. Is the steering column or the steering shaft damaged? | Go to Step 9 | Go to Step 6 |
6 | Inspect the intermediate shaft for damage. Is the intermediate shaft damaged? | Go to Step 10 | Go to Step 2 |
7 |
Caution: Refer to Fastener Caution in the Preface section. Tighten the steering column components to the specifications. Refer to Fastener Tightening Specifications. Did you complete the repair? | Go to Step 11 | -- |
8 | Replace the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement. Did you complete the repair? | Go to Step 11 | -- |
9 | Replace the steering column. Refer to Steering Column Replacement. Did you complete the repair? | Go to Step 11 | -- |
10 | Replace the appropriate intermediate shaft component. Did you complete the repair? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
