Removal Procedure
- Open the hatchback door.
- Remove the hatchback door lower garnish molding.
- Remove the screws and the hatchback lock.
- Disconnect the lock rods and the electrical connector.
Installation Procedure
- Connect the lock rods and the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the hatchback lock with the screws.
Tighten
Tighten the hatchback door lock screws to 6 N·m (53 lb in).
- Install the hatchback door lower garnish molding.
- Close the hatchback door.