GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Wave 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Stabilizer Shaft Replacement

Removal Procedure

    Object Number: 1241979 Size: SH
  1. Remove the crossmember assembly. Refer to Front Suspension Crossmember Replacement.
  2. Remove the stabilizer bar from the crossmember assembly by removing the U-clamp bolts.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1241980 Size: SH
  1. Install the U-clamps and the stabilizer bar to the crossmember and tighten to 25 N·m (18 lb ft).
  2. Install the crossmember assembly. Refer to Front Suspension Crossmember Replacement.