GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Saab
🢒
2009
🢒
9-7x
🢒
Body Hardware and Trim
🢒
Instrument Panel and Console Trim
🢒 Instrument Panel Cluster Trim Plate Bezel Replacement
Removal Procedure
Tilt the steering wheel to the full down position.
Remove the left closeout/insulator panel. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
.
Remove the knee bolster trim panel. Refer to
Driver Knee Bolster Panel Replacement
.
Remove the screws that retain the bezel to the instrument panel (I/P).
Remove the bezel from the I/P.
Installation Procedure
Install the bezel to the I/P.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the screws that retain the bezel to the I/P and tighten to
2.5 N·m (22 lb in)
.
Install the knee bolster trim panel. Refer to
Driver Knee Bolster Panel Replacement
.
Install the left closeout/insulator panel. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
.