GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 ION 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Cluster Trim Plate Bezel Replacement

Removal Procedure

    Object Number: 877771 Size: SH
  1. Pull out on the accessory trim plate in order to release the retaining fasteners.

    2. Object Number: 877774 Size: SH
  2. Disconnect the accessory trim plate electrical connector(s).

    3. Object Number: 877802 Size: SH
  3. Remove the screw retaining the cluster trim plate to the center trim panel.
  4. Lift up on the cluster trim plate to release the retaining fasteners.
  5. Remove the cluster trim plate.

Installation Procedure

    Object Number: 877802 Size: SH
  1. Align the retaining fasteners with the center trim panel.
  2. Push on the outer edge of the cluster trim plate in order to secure the retaining fasteners.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screw retaining the cluster trim plate to the center trim panel.

    4. Tighten
    Tighten the cluster trim plate screw to 2.5 N·m (22 lb in).


    Object Number: 877774 Size: SH
  4. Connect the accessory trim plate electrical connector(s).

    5. Object Number: 877771 Size: SH
  5. Align the retaining fasteners with the I/P.
  6. Push on the outer edge of the accessory trim plate in order to secure the retaining fasteners.