Tools Required

SA9111E Hose Clamp Pliers

1. Place a drain pan under the driver side of the vehicle.



2. Remove the air intake duct.
3. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Bracket Replacement in Wiring Systems.
4. Using SA9111E , reposition the radiator outlet hose clamp at the engine.



5. Remove the radiator outlet hose from the engine.



6. Remove the oil cooler hoses from the oil cooler.
7. Remove the oil cooler hoses from the thermostat housing.

1. Install the oil cooler hoses to the oil cooler.
2. Install the oil cooler hoses to the thermostat housing.



3. Install the radiator outlet hose to the engine.
4. Using SA9111E , reposition the radiator outlet hose clamp at the engine.
5. Install the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Bracket Replacement in Wiring Systems.



6. Install the air intake duct.
7. Remove the drain pan from under the vehicle.