GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2005 🢒 L300/LW300 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Rear Cable Replacement

Removal Procedure

    Object Number: 891761 Size: SH
  1. Disengage the console park brake boot by squeezing the boot on the sides while pulling upward.
  2. Loosen the park brake adjusting nut to allow slack in the cable.

    3. Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

  3. Raise the vehicle on a hoist.

    4. Object Number: 891919 Size: SH
  4. Disconnect the rear brake cable to the front park brake cable and discard the clip.
  5. Remove the park brake cable return spring from the backing plate and remove the cable.

Installation Procedure

    Object Number: 891919 Size: SH
  1. Install the park brake cable onto the park brake actuator and install the return spring.

    2. Important: A new attachment clip must be used whenever the park brake cables are disconnected.

  2. Using a new clip, attach the rear park brake cable to the front park brake cable.
  3. Adjust the park brake cable. Refer to Park Brake Adjustment .
  4. Install the park brake boot.
  5. Lower the vehicle from the hoist.