Callout
| Component Name
|
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications
.
|
Head Restraint Replacement |
1
| Restraint, Head Rest
Tip Use
J 39509
Headrest Removal Tool to aid in the removal. |
Seat Belt Exit Bezel Replacement |
2
| Bezel, Seat Belt Exit
Tip Grasp the bezel and pull upward to remove. |
Seat Back Trim Panel Replacement
Preliminary Procedure
- Remove the closeout hinge panel. Refer to
Close Out Hinge Panel, Cushion Cover Shield and Riser Hook Cover Replacement - Left Side - Rear No 2
or
Close Out Hinge Panel, Cushion Cover Shield and Riser Hook Cover Replacement - Right Side - Rear No 2
.
- Remove the screws from the seat back release handle. Refer to
Head Restraint Mechanism, Handle and Seat Back Latch Release Replacement - Rear No 2
.
|
3
| Bezel, Closeout Trim
|
4
| Retainer, Seat Back Trim (Qty: 1)
|
5
| Panel, Seat Back Trim
Tip Feed the seat back release handle though the opening
in the seat back trim panel. |
6
| Retainers, Seat Back Trim (Qty: 8)
|