For 1990-2009 cars only
Removal Procedure
- Disconnect wiring harness from pump.
- Remove fastener attaching solvent container.
- Lift solvent container and release lower attachment tab on bottle.
- Remove fluid hose from pump, making sure to capture spilling solvent.
- Remove solvent container from vehicle.
- Empty fluid from solvent container into a holding container and remove pump from fluid bottle by pulling firmly on pump.
Notice: Use caution when removing hoses from washer system components to avoid spilling washer fluid on painted surfaces.
Installation Procedure
- Install washer pump to solvent container.
- Install fluid hose to pump.
- Position solvent container into location and engage attachment tab.
- Install fastener attaching solvent container.
- Connect wiring harness to pump.
- Fill solvent container with washer solvent.
- Check that pump operates properly.
Notice: Do not reuse washer fluid as debris may clog the system.
