For 1990-2009 cars only
Tools Required
| • | DT 46424 Adjustable Bearing Remover |
| • | DT 46516 Driver |
| • | EN 46342 Driver Handle |
| • | SA9133T Axle Seal Puller |
| • | SA9133T-1 Axle Seal Puller Adapter |
Removal Procedure
- Using the DT 46424 (2), SA9133T-1 (1), and SA9133T (3) remove the park pawl actuator bearing (69) from the transmission case.
- Inspect the bearing for wear or damage. Replace as needed.
Installation Procedure
Using the 26 mm side of DT 46516 (2) and EN 46342 (1), install the 9 x 20 x 6 mm park pawl actuator bearing (69) until it bottoms out flush in the transmission case.
