Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the battery current senor. Refer to Battery Current Sensor Replacement .

1

Nut, Positive Battery Terminal Clamp

Tighten
13 N·m (115 lb in)

2

Retainer, Positive Battery Cable Harness (Qty: 2)

Tip
When removing the retainers, use an appropriate tool as not to damage the retainer.

3

Retainer, Positive Battery Cable (Qty: 2)

Tip
When removing the retainers, use an appropriate tool as not to damage the retainer.

4

Terminal, Battery Cable Generator

Tip
Remove the retaining nut for the generator.

Tighten
13 N·m (115 lb in)

5

Terminal, Engine Ground

Tip
Remove the retaining screw for the chassis ground.

Tighten
20 N·m (15 lb ft)

6

Cable, Positive Battery