Instrument Panel Cluster Trim Plate Bezel Replacement. Buick Allure 2005

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2005 🢒 Allure 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Cluster Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement Prior to November 2004

Object Number: 1700341 Size: MF

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Screw, Instrument Panel Cluster Bezel Tip The screw can be accessed by opening the instrument panel compartment. Tighten 2 N·m (18 lb in)
2	Screw, Instrument Panel Cluster Bezel Tip Remove the left instrument panel air outlet and remove the screw that attaches to the trim plate, if equipped. Tighten 2 N·m (18 lb in)
3	Trim Plate, Instrument Panel Cluster Tip Pull the trim plate away from the instrument panel far enough to disconnect the headlamp switch electrical connector, then remove from the vehicle.
4	Nut, Cluster Trim Panel (Qty: 1)
5	Clip, Instrument Panel Cluster Trim Plate (Qty: 9)

Instrument Panel Cluster Trim Plate Bezel Replacement After November 2004

Object Number: 1549647 Size: MF

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Screw, Instrument Panel Cluster Bezel (Qty: 1) Tip The screw can be accessed by opening the instrument panel compartment. Tighten 2 N·m (18 lb in)
2	Trim Plate, Instrument Panel Cluster Tip Pull the trim plate away from the instrument panel far enough to disconnect the headlamp switch electrical connector, then remove from the vehicle.
3	Nut, Cluster Trim Panel (Qty: 1)
4	Clip, Instrument Panel Cluster Trim Plate (Qty: 4)