GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Allure 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise the vehicle and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 357456 Size: SH
  3. Remove the stabilizer shaft link bolt and nut.
  4. Remove the stabilizer shaft link from the vehicle.

Installation Procedure

    Object Number: 357456 Size: SH
  1. Install the stabilizer link into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft link bolt and nut.

    3. Tighten
    Tighten the stabilizer shaft link nut to 23 N·m (17 lb ft).

  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.