GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Electrical 🢒 Power Steering Pump Installation

Tools Required

J 25033-C Pulley Installer


    Object Number: 1395922 Size: SH

    Important: Follow the procedure sequence in order to prevent drive belt mis-alignment and/or possible damage/distortion to the components.

  1. Place the power steering pump in position to the cylinder block.
  2. Loosely install the power steering front bolt in order to hold the power steering pump in position.
  3. Place the power steering front bracket in position.

    4. Object Number: 1395920 Size: SH
  4. Loosely install the power steering side bracket bolt.
  5. Hold the power steering pump firmly against the engine block.

    6. Notice: Refer to Fastener Notice in the Preface section.

  6. Tighten the power steering pump front bolt.

    7. Tighten
    Tighten the power steering pump front bolt to 50 N·m (37 lb ft).

  7. Install the power steering pump side bolt.

    8. Tighten
    Tighten the power steering pump side bolt to 50 N·m (37 lb ft).


    Object Number: 1395919 Size: SH
  8. If removed, install the power steering pump pulley using the J 25033-C .