GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Controls - 3.6L 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure
  1. Turn the ignition OFF.

    2. Object Number: 1401467 Size: SH
  2. Disconnect the purge line from the purge valve solenoid.

    3. Object Number: 1394073 Size: SH
  3. Disconnect the purge valve solenoid electrical connector.

    4. Object Number: 1344143 Size: SH
  4. Disconnect the purge line from the manifold side of the purge valve solenoid.

    5. Object Number: 1395512 Size: SH
  5. Remove the purge valve solenoid and bolt from the intake manifold.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1395512 Size: SH
  1. Install the purge valve solenoid to the intake manifold.

    2. Tighten
    Tighten the purge solenoid bolt to 10 N·m (89 lb in).


    Object Number: 1344143 Size: SH
  2. Connect the purge line to the manifold side of the purge valve solenoid.

    3. Object Number: 1394073 Size: SH
  3. Disconnect the purge valve solenoid electrical connector.

    4. Object Number: 1401467 Size: SH
  4. Connect the purge line to the purge valve solenoid.