GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Barometric Pressure Sensor Replacement

Removal Procedure

    Object Number: 1210599 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Disconnect the barometric pressure (BARO) sensor electrical connector .
  3. Remove the BARO sensor retainer.
  4. Remove the BARO sensor.

Installation Procedure

    Object Number: 1210599 Size: SH
  1. Install the BARO sensor.
  2. Install the BARO sensor retainer.
  3. Connect the BARO sensor electrical connector .
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .