GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 1209606 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the stabilizer shaft bolt and clamp.
  3. Remove the stabilizer shaft insulator (2) from the stabilizer shaft.

Installation Procedure

    Object Number: 1209606 Size: SH
  1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft insulator bracket.

    3. Tighten
    Tighten the bolt to 48 N·m (35 lb ft).

  3. Lower the vehicle.