GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Body 🢒 Doors 🢒 Rear Door Opening Weatherstrip Replacement

Removal Procedure

    Object Number: 164727 Size: SH
  1. Open the rear door.
  2. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Remove the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement .
  4. Remove the weatherstrip.

    5. Starting in the center bottom of the weatherstrip, pull the weatherstrip upward and away from the pinch-weld flange.

  5. Remove the weatherstrip from the door opening.

Installation Procedure

    Object Number: 164727 Size: SH
  1. Install the weatherstrip to the door opening.
    2. 1.1. Start in the center bottom of the pinch-weld flange.
    1.2. Push the weatherstrip and retainers on the flange.
    1.3. Ensure that the weatherstrip and retainers are fully seated on the flange before installing the rear carpet retainer.
  2. Install the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Install the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement .
  4. Inspect the door for proper operation.
  5. Close the door.