GM Service Manual Online
For 1990-2009 cars only

Up/Down or In/Out Adjustment

    Important: The door side upper and lower hinge bolts must remain tight enough to retain door adjusted position.


    Object Number: 315802  Size: MH
  1. Loosen the bolts on the door side upper and lower hinges. Do not remove the bolts.
  2. Adjust the door up or down by repositioning the door as needed.
  3. Adjust the door in or out by repositioning the door as needed.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Tighten the door side upper and lower hinge bolts.
  6. Tighten
    Tighten the bolts to 33 N·m (24 lb ft).

Fore/Aft Adjustment


    Object Number: 1363635  Size: SH
  1. Remove the front fender insulator in order to gain access to the body side hinge bolts.
  2. Adjust the door fore and aft by repositioning the door as needed.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the body side upper and lower hinge bolts.
  5. Tighten
    Tighten the bolts to 33 N·m (24 lb ft).

  6. Install the front fender insulator.