Adjustment Procedure
- Disable the SIR. Refer to
SIR Disabling and Enabling
in SIR.
- Using the power seat switch, run the seat adjuster rearward until the drive bracket (3) and the anchor bracket (2) are together on either side of the adjuster.
- Remove the drive cable (4) from the side of the adjuster which contains the brackets that touch.
- Use the power seat switch to run the adjuster rearward until the other pair of brackets are together.
- Install the removed drive cable.
Important: Inspect all 4 cables to verify that the cables are straight.
- Test the adjuster for proper operation.
- Enable the SIR. Refer to
SIR Disabling and Enabling
in SIR.