GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Body 🢒 Wiring Systems 🢒 Transmission Control Replacement

Removal Procedure
  1. Remove the console trim plate . Refer to Front Floor Console Replacement .
  2. Remove the console wiring harness.

    3. Object Number: 161196 Size: SH
  3. Remove the console shift control wiring harness.
  4. Remove the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement .
  5. Remove the park/lock cable. Refer to Park Lock Cable Replacement .
  6. Disconnect the lightbulb and the retainer from the shiftier.

    7. Object Number: 161200 Size: SH
  7. Remove the console shift control retaining nuts.
  8. Remove the console shift control assembly from the vehicle.

Installation Procedure

    Object Number: 161200 Size: SH
  1. Install the console shift control into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the console shift control retaining nuts.

    3. Tighten
    Tighten the console shift control retaining nuts to 24 N·m (18 lb ft).

  3. Install the park/lock cable. Refer to Park Lock Cable Replacement .
  4. Install the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement .

    5. Object Number: 161196 Size: SH
  5. Install the console shift control wiring harness.
  6. Install the console wiring harness.
  7. Install the console trim plate. Refer to Front Floor Console Replacement .