Removal Procedure
- Remove the left engine mount strut from the left engine mount strut bracket. Refer to
Engine Mount Strut Replacement - Left Side
.
- Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.
- Remove the exhaust crossover pipe nuts (5) and studs (1).
- Disconnect the engine mount strut bracket bolts from the cylinder head.
- Remove the left engine mount strut bracket and bolts from the vehicle.
Installation Procedure
- Install the left engine mount strut bracket and bolts to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Connect the engine mount strut bracket bolts to the cylinder head.
Tighten
Tighten the engine mount strut bracket bolts to 50 N·m (37 lb ft).
- Install the exhaust crossover pipe nuts (5) and studs (1).
Tighten
Tighten the exhaust crossover pipe nuts (5) to 34 N·m (25 lb ft).
- Connect the PCV tube to the air intake duct.
- Install the left engine mount strut to the left engine mount strut bracket. Refer to
Engine Mount Strut Replacement - Left Side
.