GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Engine Mount Strut Bracket Replacement - Right Side

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the pulley from the generator.
  3. Remove the right engine mount strut and radiator support bracket from the right engine mount strut bracket. Refer to Engine Mount Strut Replacement - Right Side .
  4. Remove the generator bolts from the generator.
  5. Move the generator off to the side to provide access to the engine mount strut bracket bolts.

    6. Object Number: 1457532 Size: SH
  6. Remove the engine mount strut bracket bolts from the cylinder head.
  7. Remove the right engine mount strut bracket from the vehicle.

Installation Procedure
  1. Install the right engine mount strut bracket to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1457532 Size: SH
  2. Connect the engine mount strut bracket bolts to the cylinder head.

    3. Tighten
    Tighten the engine mount strut bracket bolts to 50 N·m (37 lb ft).

  3. Install the generator into the proper position.
  4. Install the generator bolts.

    5. Tighten
    Tighten the generator bolts to 50 N·m (37 lb ft).

  5. Install the right engine mount strut and radiator support bracket to the right engine mount strut bracket. Refer to Engine Mount Strut Replacement - Right Side .
  6. Connect the pulley to the generator.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .