Tools Required
• | J 43781 Input Carrier
Bushing Remover/Installer |
Important: The preferred method for removing/installing
the input carrier bushing is to use J 43781
and a press. If a press is not available, use J 43781
and J 8092
universal driver.
- Position the input carrier assembly (3) on the press with the external
splines facing up.
- If the bushing will be removed without a press, install the short end
of J 43781
(2) ontoJ 8092
(1).
- Using J 43781
,
press or drive the bushing (4) out of the carrier.
- If the bushing will be installed without
a press, install the long end of J 43781
(2) onto J 8092
(1).
- Install a new bushing (3) onto J 43781
(2).
- Using J 43781
, press
or drive the bushing into the carrier until J 43781
(2) seats.