For 1990-2009 cars only
Special Tools
| • | EN-46103 Camshaft Actuator Valve Seal Remover/Installer |
| • | J 29184 Output Shaft Seal Installer |
- Install the NEW crankshaft front oil seal into the engine front cover using the J 29184 .
- Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.
- Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN-46103 .
Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.
