Power Steering Pump Pulley Replacement LY7

Tools Required

1. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement .



2. Use the J 25034-C and J 25034-257 in order to remove the pump pulley.

1. Use Mac® Tools Power Steering Pump Pulley Service Kit or equivalent, to install the power steering pump pulley.




Important: 

•	Ensure that the face of the pulley hub is flush to within 0.25 mm (0.010 in) with the end of the pump shaft.

•	Do not use the arbor press to install the pulley.

2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement .

Power Steering Pump Pulley Replacement L26

Tools Required

1. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement.



2. Using J 25034-C remove the power steering pump pulley from the power steering pump.

1. Using J 25033-C install the power steering pump pulley to the power steering pump.




Important: 

•	Never use a hammer to install the power steering pulley.

•	The face of the power steering pulley hub must be flush to within 0.25 mm (0.010 in) with the end of the power steering pump driveshaft.

2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement.
3. Fill the power steering system. Refer to Checking and Adding Power Steering Fluid.
4. Bleed the power steering system. Refer to Power Steering System Bleeding.
5. Inspect the power steering system for leaks. Refer to Power Steering Fluid Leaks.