Camshaft Position Actuator Removal - Right Side Intake for Buick Allure 2007

Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in the Preface section.





Important: Some models use a second design inverted tooth timing drive system on the secondary drive components. Refer to Camshaft Timing Drive Design Identification for more information on specific changes.

1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
2. Remove the right intake camshaft position actuator bolt.
3. Remove the right intake camshaft position actuator.