Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Place the inoperative reading lamp in the ON position. Does the reading lamp operate properly? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Does the courtesy lamp function of the inoperative reading lamp operate properly? | Go to Step 4 | |
4 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 7 |
5 | Test for a poor connection or an open in the reading lamp supply voltage circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the reading lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 8 |
7 | Repair an open or high resistance in the ground circuit of the reading lamp switches. Refer to Circuit Testing and to Wiring Repairs . Did you correct the condition? | Go to Step 9 | -- |
8 | Replace the inoperative reading lamp. Refer to Overhead Console Courtesy Lamp Replacement . Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
