Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
- Remove the rear quarter upper trim. Refer to
Quarter Upper Trim Panel Replacement .
- Remove the rear quarter lower trim. Refer to
Quarter Lower Rear Trim Panel Replacement.
Caution: Refer to Glass and Sheet Metal Handling Caution in the Preface section.
Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle to protect the outer painted surface.
- This will allow the urethane adhesive to be separated from the window:
| • | Leave a base of urethane on the pinch-weld flange. |
| • | The only suitable lubrication is clear water. |
| • | Use
J 39032 or equivalent in order to remove the window. |
| • | Remove the quarter modular window from the pinch-weld flange. |
