GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Allure 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Seat Belt Replacement - Center Rear

Removal Procedure

    Object Number: 793771 Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the center seat belts nuts (1).
  3. Remove the center seat belts from the vehicle.

Installation Procedure

    Important: Verify that the rear seat belt anchors are installed in their proper orientation.


    Object Number: 793771 Size: SH
  1. Install the center seat belts to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the center seat belts nuts (1).

    3. Tighten
    Tighten the nuts to 42 N·m (31 lb ft).

    Important: Be sure to route the buckle correctly through the rear seat cushion.

  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .